Aspen lining Aspen wooden panels are widely used for decoration of sauna, due to its low density, lack of resin and a small amount of knots. Useful specs of aspen explains high tannins, which not only greatly reduce the ability of wood to rot in a damp environment, but also gives it a distinctive incredible flavor. Aspen lining do not cracks, easily processed and performs well in high humidity conditions.
Alder lining Alder wood becomes very popular in the building and construction of sauna ot guest houses. The reason - a very low thermal conductivity, strength, allowing alder to become a great material for wooden design In addition, the alder finishing has a low hygroscopic, absorb very low moisture . The combination of these qualities with durability makes alder wood the best option for the construction of the sauna. There is another very interesting quality that distinguishes alder finishing from other methods. Alder has an unusual color, like a colored coffee wood. Under the influence of humidity and temperature can change color and acquire a different shade, so alder interior decoration in the construction of the sauna looks more impressive.
Abachi Abachi - palm tree with a porous structure that grows in the tropics. Has a small density that prevents heat lining even at the highest temperature in the sauna room. When the temperature rises in the sauna, the abachi wood takes the temperature of the air, but soon as you touch the wood, it immediately takes the temperature of the human body. Wood is smooth, without knots and resin, quite soft, moisture resistant, easy to work with, often has a color from cream to straw yellow. Fir-tree Fir-tree wood. Scandinavian spruce grown specifically as raw material for the production of decorative lining, which is widely used for for covering accommodation, saunas, terraces, etc Scandinavian spruce is processed by special technology of hot air. Spruce lining has a light yellow color with lots of small knots. Spruce wood is mostly accepted to perceive as a decorative element. The main advantage of spruce lining is a durability, due to high resin content, protecting the wood from rotting.
Ash Ash wood is the most valuable hardwood. Ash lining almost do not split apart. it is pretty taut and tight, and recalls the specs of oak wood. Wood texture is expressive and bright, that;s why it is often used for the manufacture of interior finishes and trim and sauna walls.
Heat treated wood - an advanced tree. The heat treatment process occurs as follows: well- dried wood is placed in a special room from which oxygen is taken off (the wood do not burn at higher temperatures), but instead of oxygen the room fills with water steam. Then the wood is heated with high temperature, from 200 to 240 C. After this process the wood has saturated dark brown shade over the entire thickness , whereby thermo wood looks no worse than expensive exotic woods. The heat treated wood is moisture resistance and do not rot.