Cilindro has an apertured outer casing made of stainless steel. You can adjust the nature of the heat from soft to sharp by throwing water either to the side of the heater or straight on top of the stone pillar. Cilindro H has a partially apertured outer casing in the front, which offers the sauna bather the benefits of a large stone amount, but also enables the heater to be located in smaller space. Cilindro F has a solid outer casing. The casing decreases the safety distance requirements, and therefore the heater’s space requirement is small and benches can be located near to it. This gives more freedom for creativity in sauna design. Cilindro F offers sharper sauna bath compared to the softer sauna bath provided by the other two Cilindro models. In Cilindro H and Cilindro F the stone space is made of stainless steel and outer casing is made of black painted, zinked steel. The heaters are equipped with a built-in control unit and the operating switches are placed down on the heater’s front side. Cilindro models 110E are controlled by a separate control unit (e.g. XENIO, XAFIR or C150).
Suitable control units:
- HARVIA C170VKK (2,3-17kW)
- HARVIA CS110 (2,3-11kW)
- HARVIA CS170 (2,3-17kW)
- HARVIA C150 (2,3-17kW)
- HARVIA CX110 (2,3-11kW)
- HARVIA CX170 (2,3-17kW)
Technical details
Property name |
Value |
Output, kW |
10,8 |
Sauna room min, m3 |
9 |
Sauna room max, m3 |
18 |
Dimensions width, mm |
365 |
Dimensions height, mm |
1070 |
Dimensions depth, mm |
365 |
Weight, kg |
13 |
Stone capacity max, kg |
120 |
Sauna room height min, cm |
19f0 |
Supply voltage, phase |
400V 3N |
Connection cable, mm2 |
5 x 2,5 |
Sensor cable, mm2 |
|
Data cable, mm2 |
|
Fuse A |
3 x 16 |
Control unit |
Separate |
Water tank capacity, l |
- |
Vaporisation effeciency |
- |
Additional information |
- |
Stones |
Stones are not included |
Add your commentary