Select language 
- The area of the heating surfaces is record large, they are directly heated by flame and cooled by air.
- A large air-tight firebox makes it possible to effectively use the stove in the mode of continuous burning.
- Special calibrated orifices supply hot air for the complete burning of exhaust gases.
- Convective heat-exchange pipes throughout the cross section and length, from the beginning to the end, are located directly in the flame.
- The shape of the firebox is that of the flame of the freely burning solid fuel.
- You can warm up food on the upper horizontal surface heated with the flame.
- The front and rear surfaces on which convective pipes are located take full part in the convective heat exchange.
- A large replaceable grate ensures regular burning throughout the area of the firebox. Ashes drop down to the ash box through the grate apertures.
- With a capacious pull-out ash box you can remove ashes, not interrupting the process of burning.
- Inlet holes of convective heat-exchange pipes are higher than the floor level, which is good for free convection of the heated air.
- The boiler has a built-in stable base with holes for being fixed to the floor.
Pipes are not included in package: Smoke pipes / Sauna chimney for woodburners
Add your commentary